Start and Monitor the Print
This page explains how to send the file to the printer, start the print, and watch for early print issues. The resources below cover file transfer, first-layer checks, and common problems that may require stopping or restarting a print.
How to Send a File (G-Code) to Your 3D Printer - Easy Tutorial - Step by Step
This video shows how to move a sliced G-code file from a computer to a 3D printer using a microSD card. It covers saving the file from the slicer, transferring it to the card, ejecting the card, inserting it into the printer, selecting the correct file, and starting the print.
Why this is useful: Before starting a print, users need to make sure the correct sliced file is selected and sent to the printer. This video gives a simple example of that process for printers that use a microSD card, which follows the same process as a USB drive.
Sending File to 3D Printer from Bambu Studio
This video shows how to send a sliced file from Bambu Studio to a Bambu Lab 3D printer. It covers opening the file, arranging the model on the build plate, selecting the correct printer, slicing the plate, checking for errors, and sending the print through Bambu Studio.
Why this is useful: Some printers can receive files directly from slicer software instead of using a microSD card or USB drive. This video helps users understand how to select the correct printer, confirm the file is ready, and start the print from Bambu Studio.
2 Tricks for Getting the Perfect First Layer - 3D Printing
This video explains what a good first layer should look like and how to recognize when the nozzle is too high or too close to the build plate. It also covers adjusting the bed while printing a skirt or brim, checking that the print is sticking, cleaning the build plate, and using the correct nozzle and bed temperatures.
Why this is useful: The first layer is one of the easiest places to catch print problems early. Watching the first few minutes of a print can help users decide whether to continue, adjust the printer, or stop and restart before wasting time and material.
Troubleshooting 3D Printer Issues | 10+ Common Problems 3D Printing Beginners Have!
This video reviews common 3D printing problems that beginners may run into before or during a print. It covers printer setup issues, power settings, bed leveling, bed adhesion, filament loading, filament type, layer shifting, files not showing on the printer, clogs, unstable prints, support settings, and reviewing the sliced file before printing.
Why this is useful: When a print starts poorly, users need to know what signs to look for and when to stop the print. This video helps users connect common print problems to possible causes so they can adjust the printer, fix the file, or restart the print when needed.
Diagnosing YOUR 3D Printer Problems!
This video shows how to look at common print problems and work backward to find possible causes. It covers surface blobs, overextrusion, backlash, loose belts or pulleys, first-layer issues, bed contamination, nozzle height, and model features that may be difficult to print.
Why this is useful: Monitoring a print is easier when users know what common problems look like. This video helps users recognize early warning signs, think through possible causes, and decide whether a print should continue or be stopped and adjusted.